Are you having problems with your MacBook Pro constantly going black? You’ll know this is a serious problem if your MacBook Pro keeps Crashing to black screen every time you turn it on. This issue needs to be addressed. You also need to check if the light is still visible on your MacBook keyboard.
It is important to understand that even if you don’t have any problems with your Mac and you are simply searching for commands you might be able use from recovery on your MacBook Pro or MacBook Air, the system may not always respond to these commands.
If you have ever had your MacBook Pro keeps Crashing to black screen, you might be familiar with the commands people suggest to you. These solutions can be found online and will be discussed in this article.
You can use the recovery commands to fix your MacBook Pro keeps Crashing to black screen problem from time to time. Or you could fix the hardware that is causing it. You can do this by opening the back cover and disconnecting and reconnecting a few components. This will be explained in detail as you read.
First, the problem is that the MacBook Pro keeps Crashing to black screen due to a macOS upgrade or because the device was dropped. We will investigate the issue and find the best solution.
Why does my MacBook Pro keeps Crashing to black screen?
There could be many reasons why your MacBook Pro keeps Crashing to black screen randomly. Let’s get into the details to understand why this happens.
Incomplete Update:
This error can occur if your MacBook was in the update mode. Once your MacBook has been updated, don’t turn it off immediately. Instead, let us get it done using the options.
Internal Issues:
You can check the RAM or SSD slot to determine the cause. You can fix software-related issues with the NVRAM reset commands. If it is an internal SSD problem, however, you will need to open the MacBook Back screen problem and repair it manually.
You may need to replace the hard drive or fix the connectors. If the battery is not set correctly after being dropped, you can inspect the connectors.
Power Issues
Although it might seem obvious, power problems are the main reason your Mac’s screen goes blank. This is a good place for you to start, regardless of whether it’s a bad charger cord or a bad battery that causes your screen to go black.
Unable to Boot Up:
Is that the blue screen of the MacBook? The Apple logo isn’t visible on the screen. This means that your MacBook has power but your SSD isn’t working.
If your MacBook is not getting power, it means that there is a problem with the booting process. You can either leave it as is, or you can start the DIY !
These are just a few of the reasons that have been identified. There may be other reasons your MacBook displays the Apple Logo or has a black screen. You should first try to fix the MacBook using reset commands. If this fails, you can try the hardware fixes.
You will see the black screen problem disappear after you have completed the DIY.
Waking from Sleep
Black screen problems are most common after your MacBook is woken up from sleep. It is not clear if this is an Apple issue or user-related. However, it can be described as your MacBook refusing to open its lid.
It may appear that your computer has turned off (via the fan, activity indicator or other noises), but the screen is still blank. Although the cause of this situation is not known, it is well-recognized.
Broken Disk Permissions or Login Items
Broken disk permission issues can sometimes cause your Mac to turn black or not boot normally. Other times, it could be certain apps that get into your auto startup list and slow down your MacBook’s performance. You’ll need to fix the problems (see Step 5).
Software/App Error
Everyone wants to put the blame on a glitch. This is a quick fix to an otherwise intractable problem, especially if the screen turns black or you experience other symptoms.
There are known bugs that could be the cause of this problem, but it is possible. To find out if you are experiencing this issue, make sure to visit Apple Community Forum or the security update list.
How to Fix MacBook Pro keeps Crashing to black screen ?
You will need to take many actions to fix the black screen. The commands will fix the problem by either resetting RAM/SSD, or simply booting up in Safe Mode. Let me begin by explaining everything in detail.
Step 1: Test Your Power
Check that the MacBook Pro’s previous charging port was not ripped out of the wall, or that no one stepped on it. Also, check the battery cycles to determine if they need to be replaced.
Go to the Apple menu at the top of your Mac, select “About this Mac”, then click “System Report”. After the report opens, select “Power” on the right-hand side.
Look down from the power panel until you see the condition and cycle count for your battery. If the battery condition is “Poor” (or “Bad”), it’s time for a new MacBook Pro battery.
You can temporarily save your MacBook by keeping it plugged in if you are unable to buy a new battery or have a problem with your current one. It does not reduce the laptop’s working capacity, but it is temporary.
Step 2: Start over
Restarting the machine is the best option if the problem is not caused by the battery. There are several ways to do this:
- To bring up the dialog box use the CNTRL + EDIT keys. Once you have seen the dialog box, press ENTER. After the computer has shut down, press the power button once more to restart it.
- A restart will be initiated automatically by CNTRL + EJECT + CMND.
- To turn it off, hold the power button down for five seconds. For a reboot, wait 15 seconds before pressing it again.
- Reboot your MacBook to restore its normal state and resolve the black screen problem.
Didn’t work? For a special key pattern, you can move on to the next step.
Step 3: Resetting NVRAM/PRAM
Or… not. You can try other methods if the problem persists or you might need to go more extreme. Here’s how you can reset the NVRAM/PRAM of your Mac.
- If you’re not sure, turn off your Mac.
- Hold down the power button. When you hear the startup chime press the power button.
- These should be held until another startup rings, then they can be released.
- Although your Mac should now boot normally, there may be some settings that have been lost along the way. Make sure you check your system preferences to make sure all of your date/time, disk options, and display settings are correct.
Step 4: Use a well-known key sequence
Some users reported that a particular key sequence, culled from the MacRumors forum, helped them fix their black screen boot problems. It’s worth giving it a try. You can do this:
- Once you press the power button, it will bring up a dialog box that will shut down your computer.
- To send your Mac to sleep, press “S”.
- To force a hard shutdown, hold the power button.
- For a restart, wait around 15 seconds and then press the power button again.
- Now your MacBook will boot normal, not black.
Step 5: Reset System Management Controller
Another option to fix a black screen is an SMC reset. It is important to be able to perform this task as it will resolve other problems such as slowdowns or overheating.
These steps will reset your MacBook’s SMC.
- Turn off the computer
- Connect to the power source
- After the MacBook is turned off, hold down Shift and Control simultaneously for approximately 10 seconds.
- Give the keys away
- Restart your computer
- Now, the SMC should be reset
- If you have an older MacBook, the SMC reset may differ from this. For more information, click here.
Step 6: Verify & Repair Disk Permissions
Broken disk permissions are one reason for black screens. It’s simple to fix and diagnose.
All you have to do is run CleanMyMac from your Mac. You can open the app by clicking “Run”, then go to Maintenance > Repair Disk permissions.
Step 7: Boot into Safe Mode
There are many reasons why you might experience a black screen, including problems with your startup disk.
This problem can be fixed by switching to safe mode on your MacBook and allowing it check the disk.
These steps will allow you to boot in safe mode:
Your computer should be turned off
Keep the Shift key down while you power back up, until the Apple logo appears.
After the logo appears, let go of the key
Now the computer will start in safe mode. It might take longer than expected as it runs diagnostics of your startup disk.
After it boots up, you can start the normal startup to see if the black screen problem has been resolved.
Step 8: Look for app bugs or issues
CleanMyMac is the best way to detect suspicious apps.
Check Extensions for Launch Agents or Login Items. If you discover apps that launch automatically, often without your permission, feel free to disable them or remove them.
You can search the Apple Community to find a post that matches yours. This will allow you to determine if there are bugs or ways to squash them.
MacRumors, iFixit and other forums are great places to start. You can also search for general articles.
It was discovered that his iCloud password had caused the computer’s black screen to display when he used his mouse without any login options.
Although it’s not a common correlation, sometimes random events can cause your computer to go crazy. It doesn’t hurt, however, to take a look.
Fix the Hardware problem on MacBook
If the command fixes do not work, the next step is to work with the MacBook’s internal hardware. It could be that the SSD isn’t in the correct place or it was moved around and misaligned when it was dropped. Another possibility is corrosion of the connector.
This section will focus on two components that can be repaired, the battery and the SSD. We’ll also discuss how to fix them. If the problem is with the power supply, it could be the SSD that is causing the problem.
Open the Back Case
You will avoid any shocks caused by the hardware if the MacBook is turned off first. To see the hardware, flip the laptop upside down and remove the screws. To check if the fan is turning on or off, you can turn the fan on and then off again to confirm that it is functioning before you move on to the next step.
Disconnect the battery
You must do the same with the battery cable. Simply disconnect the battery cable from your processor and place it on your system. Unplug the connector and open it. Clean out any dirt or debris, then reconnect everything. It is easy to fix any issues with your screen by doing this.
Clean the SSD
After all that is done, you can open the case to check if the connector was placed correctly. If there are any problems, disconnect the cable and unplug the SSD. Then reconnect the backs. Make sure to clean any dirt or debris from the connector and then you can replace it properly.
To remove the SSD, simply unscrew the screws and place it back in the same manner.
Here are some precautions you should take
1.Do not attempt to fix hardware parts. You should only attempt to fix the hardware yourself if you are an experienced professional. If there are problems with the arrangement of the hardware parts, you may have to deal with them.
2.Ensure that there is a light at the keyboard when pressing the power button. This will indicate that the MacBook has power. If the SSD is not working properly, you can either replace the part or fix the problem. If there is no light, check the battery connector and adaptor first.
Last Words
If you need to fix MacBook Pro keeps Crashing to black screen problem, please refer to the NVRAM reset commands.
If the commands fail to turn on your MacBook, you can go to the hardware fix. There you will need to check the battery and the SSD for proper connection.
If you have any other ideas on how to fix the black MacBook Pro screen, please leave a comment below.